products

Products

  • 24V 25.6V 100Ah–314Ah Self-Heating RV LiFePO4 Battery for Motorhomes & Campervans OEM Manufacturer

    24V 25.6V 100Ah–314Ah Self-Heating RV LiFePO4 Battery for Motorhomes & Campervans OEM Manufacturer

    1. 25.6V nominal (8S LiFePO4): 100Ah (2,560Wh), 150Ah (3,840Wh), 200Ah (5,120Wh), 230Ah (5,888Wh), 280Ah (7,168Wh), 314Ah (8,038Wh).

    2. Max continuous charge and discharge: 100A / 150A / 200A / 200A / 200A / 200A — up to 5.1kW from one pack.

    3. Built-in heating film, BMS-controlled; accepts charge with ambient as low as -20°C.

    4. Grade-A LiFePO4 cells, 5,000~8000 cycles.

    5. Charge voltage 29.2V max, operating window 20 – 29.2V, discharge -20 to 60°C.

    6. Bluetooth monitoring standard; CAN / RS485 / RS232 / RJ45 available as options.

    7. Parallel expansion to 16 unitst.

    8. CE / RoHS / UN38.3 / MSDS. OEM/ODM from our own plant in Guangdong.

  • 12V 150Ah 172Ah LiFePO4 RV Battery Manufacturer | 60038 H8 L5 DIN100 Group 49 OEM Solutions

    12V 150Ah 172Ah LiFePO4 RV Battery Manufacturer | 60038 H8 L5 DIN100 Group 49 OEM Solutions

    1. Two capacities in one case: 150Ah (1,920Wh) and 172Ah (2,202Wh), both 12.8V nominal.

    2. 60038 footprint (358 × 178 × 188 mm), the size sold as H8, L5, DIN100 and Group 49.

    3. Roughly 16 kg per pack, about 12 kg lighter than the lead-acid battery it replaces.

    4. Grade-A LiFePO4 cells, 3,000 cycles.

    5. Smart BMS: over-charge, over-discharge, over-current, short circuit, over-temperature, low-temperature charge cut-off, cell balancing.

    6. Bluetooth monitoring standard; app shows state of charge, voltage, current, temperature and cycle index.

    7. Up to 4 units in series (51.2V) or in parallel for larger banks.

    8. CE / RoHS / UN38.3 / MSDS. OEM/ODM from our own plant in Guangdong.

  • 12V 100Ah & 200Ah Slim LiFePO4 RV Battery — 110 mm and 132 mm Ultra-Thin Drop-In Motorhome & Campervan Battery with Bluetooth

    12V 100Ah & 200Ah Slim LiFePO4 RV Battery — 110 mm and 132 mm Ultra-Thin Drop-In Motorhome & Campervan Battery with Bluetooth

    1. 110 mm at 100Ah (395 × 286 × 110 mm), 132 mm at 200Ah (580 × 242 × 132 mm) — thin enough for bench seats, side lockers and under-bed trays that a standard battery box rules out.

    2. Two capacities on one design platform: 1,280 Wh (100Ah) for compact campervans, 2,560 Wh (200Ah) for full-size motorhomes and long-range 4×4 builds.

    3. 200Ah built as 4S1P on Grade-A prismatic LiFePO4 cells — fewer welded joints, fewer balance problems, 5,000+ cycles.

    4. 100A continuous on the 100Ah, 200A on the 200Ah — enough for an inverter and a compressor fridge running together.

    5. Bluetooth app monitoring on every unit: SOC, voltage, current, per-cell status; CAN / RS485 available as options.

    6. IP65 ABS case, discharge -20°C to 60°C, charge from 0°C — dust, wash-down and Australian summers covered.

    7. CE / RoHS / UN38.3 / MSDS certified. Factory-direct from Guangdong, OEM/ODM welcome.

  • 12V Self-Heating LiFePO4 RV Battery 100Ah 200Ah 314Ah 400Ah 628Ah OEM Manufacturer for RV Brands and Distributors (ODIPIE)

    12V Self-Heating LiFePO4 RV Battery 100Ah 200Ah 314Ah 400Ah 628Ah OEM Manufacturer for RV Brands and Distributors (ODIPIE)

    1. 12.8V across the range: 100Ah (1,280Wh), 200Ah (2,560Wh), 314Ah (4,019Wh), 400Ah (5,120Wh), 628Ah (8,038Wh).

    2. Built-in heating film, BMS-controlled — the pack accepts charge with ambient as low as -20°C.

    3. Grade-A LiFePO4 cells, 5,000~8000 cycles, roughly 10 years of daily cycling.

    4. IP67 case — under-floor boxes, exterior lockers, wet lockers on boats.

    5. Smart BMS: over-charge, over-discharge, over-current, short circuit, over-temperature, low-temperature charge cut-off, cell balancing.

    6. Bluetooth monitoring standard; CAN / RS485 / RS232 / RJ45 available

    7. Up to 4 units in series (51.2V) or parallel for larger banks.

    8. CE / RoHS / UN38.3 / MSDS. OEM/ODM from our own plant in Guangdong.

  • 12.8V 392Ah LiFePO4 RV Battery — 5,017Wh Deep Cycle Motorhome & Campervan Battery with Built-in Smart BMS

    12.8V 392Ah LiFePO4 RV Battery — 5,017Wh Deep Cycle Motorhome & Campervan Battery with Built-in Smart BMS

    1. 5,017 Wh (12.8V 392Ah) — roughly twice the energy of a typical 12V 200Ah RV battery, in a case that still fits standard battery boxes.

    2. Grade-A LiFePO4 cells, 8,000+ cycle life — over 20 years at one cycle per day.

    3. 200A max continuous charge and discharge (80A standard).

    4. Built-in smart BMS: over-charge, over-discharge, over-temperature protection and cell balancing.

    5. Bluetooth app monitoring on every unit; CAN / RS485 / RS232 / RJ45 available as options.

    6. Operating range -20°C to 60°C, charging from 0°C — covers Australian summers and European shoulder seasons.

    7. CE / RoHS / UN38.3 / MSDS certified, KC available. Factory-direct from Guangdong, OEM/ODM welcome.

  • Odipie 51.2V 356Ah 18.23kWh Floor Standing LiFePO4 Home Energy Storage Battery with EVE Grade-A Cells, 8000+ Cycles, OEM/ODM Manufacturer

    Odipie 51.2V 356Ah 18.23kWh Floor Standing LiFePO4 Home Energy Storage Battery with EVE Grade-A Cells, 8000+ Cycles, OEM/ODM Manufacturer

    1. Built on brand-new, grade-A EVE 3.2V 356Ah LFP cells — the same grid-scale cell platform used by top-tier system integrators, now sized for the home.

    2. 8,000+ cycle life at 25°C. Cycled once a day, that’s over 20 years of service before the cells reach end of life.

    3. 18.23 kWh of usable storage in a single slim cabinet — 500 × 250 × 890 mm, small enough for a utility room, garage, or hallway corner.

    4. CAN / RS485 communication built in. Works with mainstream hybrid inverters — Victron, Deye, Growatt, Sungrow and more.

    5. 200A max discharge output. Runs heavy household loads — heat pumps, air conditioning, induction cooking — without tripping.

    6. IP65-rated enclosure with Bluetooth app monitoring, so installers and homeowners can check SOC, voltage and temperature in real time.

    7. CE / RoHS / UN38.3 / MSDS certified. Factory-direct from Guangdong with OEM/ODM support for brand labeling and spec adjustments.

  • 12.8V 356Ah LiFePO4 RV Battery Manufacturer | OEM Lithium Battery Solutions for Motorhomes & Campervans

    12.8V 356Ah LiFePO4 RV Battery Manufacturer | OEM Lithium Battery Solutions for Motorhomes & Campervans

    1. 4556Wh in one case — the energy of two 200Ah packs without doubling the wiring, lugs or footprint. One battery, one BMS, one set of terminals to maintain.

    2. EVE Grade-A LiFePO4 cells rated beyond 8000 cycles. Cycled once a day, that is more than twenty years of service before capacity falls away.

    3. 200A continuous charge and discharge. A single pack runs a 2000W inverter, a rooftop air conditioner and a compressor fridge together, with headroom left over.

    4. Compact 390 × 202 × 278 mm case drops into the standard battery box most RVs, caravans and boats were built with — swap out the lead-acid and go.

    5. Bluetooth built in. State of charge, voltage, current and fault codes read straight from a phone, from the driver’s seat or the camp chair.

    6. Built-in smart BMS with over-charge, over-discharge, over-current, short circuit and temperature protection, including -20°C low-temperature handling for winter trips.

    7. Factory-direct with OEM/ODM support: your brand on the nameplate, your model numbering, set up from the first order.

    8. UN38.3, MSDS, CE and RoHS documentation prepared per batch, ready for shipping and market access.

  • 12.8V 324Ah Ultra-Slim LiFePO4 RV Battery Manufacturer | OEM Lithium Battery Solutions for Motorhomes & Campervans

    12.8V 324Ah Ultra-Slim LiFePO4 RV Battery Manufacturer | OEM Lithium Battery Solutions for Motorhomes & Campervans

    1. A 130 mm flat case gives you 4147Wh in the one position a standard battery box never fits: under the bed slats, under the seat base, or in a shallow floor locker.

    2. Grade-A LiFePO4 cells rated beyond 6000 cycles. Run it daily for years before capacity becomes a conversation.

    3. 200A continuous charge and discharge — one pack carries an inverter, a rooftop air conditioner and a compressor fridge at the same time.

    4. 12.8V across the whole platform, drop-in compatible with solar, alternator, generator and shore-power charging without rewiring.

    5. Bluetooth built in. SOC, voltage, current and fault codes read straight off a phone — no guesswork, no second trip to the battery locker.

    6. BMS protection covers over-charge, over-discharge, over-current, short circuit and temperature, so the pack looks after itself between trips.

    7. Factory-direct with OEM/ODM support: your brand on the nameplate, your model numbering, set up from the first order.

    8. UN38.3, MSDS, CE and RoHS documentation prepared per batch, ready for shipping and market access

  • 12V Ultra Slim LiFePO4 RV Battery Packs 100Ah 160Ah 200Ah 230Ah 280Ah 314Ah | 61–82 mm Flat Case for Camper & Motorhome

    12V Ultra Slim LiFePO4 RV Battery Packs 100Ah 160Ah 200Ah 230Ah 280Ah 314Ah | 61–82 mm Flat Case for Camper & Motorhome

    1. A flat case 61–82 mm thick opens positions a standard battery box cannot use: under bed slats, under seat bases, inside wheel-arch lockers and in sidewall voids.

    2. Two capacity tiers share one case — 200/230Ah and 280/314Ah — so a single compartment design and one tooling iteration covers several trim levels.

    3. 12.8V LiFePO₄ across the whole series, with a deep-cycle lifespan far beyond lead-acid and slow capacity loss in long-term storage.

    4. Sheet-steel enclosure with integrated mounting flanges: bolts down without straps or compression bars, and stands up to vibration, gravel and hose-downs in locker and chassis positions.

    5. Built-in smart BMS with over-charge, over-discharge, over-current, short-circuit and temperature protection, plus Bluetooth readout of SOC, voltage, current and fault codes on a phone.

    6. Up to 4,019Wh in an 82 mm case, 200A continuous and 500A peak — enough for an inverter, a rooftop air conditioner and a compressor fridge running together.

    7. Factory-direct supply with OEM/ODM support: private-label nameplate, model numbering and rating prints set up on the first order, not retrofitted on the fifth.

    8. Full documentation for market access and shipping: UN38.3, MSDS, CE, FCC and RoHS, prepared per batch.

  • OEM ODM 24V 36V 48V 60V 72V 80V 160Ah 320Ah Na Sodium-Ion Forklift Battery Manufacturer for Cold Storage Warehouse

    OEM ODM 24V 36V 48V 60V 72V 80V 160Ah 320Ah Na Sodium-Ion Forklift Battery Manufacturer for Cold Storage Warehouse

    We offer custom sodium‑ion battery development with flexible OEM/ODM capabilities. Our factory‑direct pricing makes bulk purchasing highly cost‑effective. All products are fully certified for the US, EU, UK, and Australian markets. Backed by mature mass production, we guarantee stable stock and fast turnaround for large orders. The extended cycle life minimises post‑sale failures and returns, while the advanced built‑in BMS ensures ultimate safety. Plus, our round‑the‑clock responsive after‑sales support protects your distribution business without interruption.

  • 48V 200Ah    Rack Mountted Sodium Ion Battery with CAN/RS485 WiFi for Solar Home Energy Storage

    48V 200Ah Rack Mountted Sodium Ion Battery with CAN/RS485 WiFi for Solar Home Energy Storage

    1.Custom sodium-ion battery development plus flexible OEM & ODM production.

    2.Factory-direct sales eliminate middlemen for cost-efficient bulk purchasing.

    3.Fully certified to comply with US, EU, UK and Australia market regulations.

    4.Mature mass production ensures stable stock and shorter lead times for big orders.

    5.Long service life lowers after-sales failure and return rates for partners.

    6.Premium built-in BMS enables full safety protection of battery packs.

    7. 24-hour responsive after-sales support secures distributors’ business.

  • CE Certified 48V 51.2V 100Ah Smart Marine Lithium Battery | Victron Compatible for Yachts

    CE Certified 48V 51.2V 100Ah Smart Marine Lithium Battery | Victron Compatible for Yachts

    1. More than 10 years experience in customized lithium battery OEM and ODM service.

    2. Factory direct sourcing eliminates middle links and maximizes profit for business partners.

    3. Meet full certification requirements to smoothly enter US, EU, UK and Australian markets.

    4. Robust manufacturing capacity and dependable supply chain support for high-volume projects.

    5. Drop-in replacement design for effortless upgrades from traditional lead-acid battery systems.

    6. Engineered for an extended lifespan, our batteries deliver an ultra-low failure rate to significantly reduce your after-sales maintenance overhead.

    7. Intelligent BMS technology delivering advanced safety protection and real-time battery management.

    8. Fast-charging capability, ultra-low self-discharge, and scalable parallel connectivity for maximum application flexibility.

123 Next > >> Page 1 / 3
Contact Us