Product Parameters
|
Model |
12V 324Ah |
| Rated Voltage |
12.8V |
|
Nominal Capacity |
324Ah |
| Energy | 4.147kWh |
| Size(mm) |
510*130*280mm
|
| BMS Protection Function |
Over charge protection, Over discharge protection, Temperature protection, Balanced function |
| Charge-end-off Voltage |
14.6V |
| Max. Continuous Charging Current |
200A |
|
Max. Continuous Discharging Current |
200A |
|
Peak Discharge Current |
400A(3S) |
| Charge Temperature |
0-55℃ |
| Discharge Temperature |
-20-60℃ |
| Storage Temperature |
Within 2 months:-20℃~40℃,Within 6 months:-10-35℃ |
|
Optional |
CAN/RS485/Heating Function,Bluetooth (standard) |
Features
1. 4147Wh in a case that fits where boxes don't. At 510 mm long and 130 mm thick, this pack sits flat under bed slats, inside seat bases and in floor lockers that a conventional battery box leaves empty. You get a full day of off-grid energy without giving up storage space to it.
2. 6000+ cycles from Grade-A cells. The cells inside are matched Grade-A LiFePO4, good for more than 6000 charge cycles before they drop to end of service life. For a full-time traveller, that is years of daily cycling; for a weekend rig, it will likely outlast the van fit-out.
3. 200A in, 200A out. Charge at up to 200A from a large solar array or a DC-DC charger, and draw 200A continuous on the output side. That is enough headroom to run a 2000W inverter, a rooftop air conditioner and a compressor fridge together — the combination that used to force people into 24V systems.
4. One voltage, every charge source. Solar controller, vehicle alternator, on-board generator, shore power through an AC charger — all of them work on the standard 12.8V charging profile (14.6V absorption) with no reconfiguration. Swap out an old lead-acid bank and the rest of the system stays as it is.
5. Bluetooth monitoring as standard. Open the app and read state of charge, voltage, current, cycle count and fault codes from the driver's seat. When a customer rings asking "is it charging?", the answer takes ten seconds instead of a multimeter.
6. A BMS that handles the things you forget. Over-charge, over-discharge, over-current, short circuit, high and low temperature — the built-in protection covers the failure modes that end trips early. At the same usable energy, the pack weighs a fraction of the lead-acid bank it replaces, and that saved weight goes back into water, fuel and payload.
Applications
Under-bed and under-seat house battery for motorhomes and caravans The 130 mm case drops into the void under bed slats and seat bases — the one place a tall battery box could never go — and leaves the garage free for gear.
Campervan conversions (VW / Sprinter / Transit class) Mounts flat in floor-level compartments and shallow sidewall voids, so the living layout never has to work around the battery.
4WD and overland vehicles A secondary battery for the compressor fridge, lighting and comms, fitted in chassis-rail and drawer-system positions where a standard box will not fit.
Long off-grid stays with air conditioning 324Ah at 12.8V carries 4147Wh with 200A continuous output — the configuration for rooftop air conditioning running through the night without a generator.
Weekend rigs upgrading from lead-acid Same 12.8V charging profile and drop-in terminals, so the swap is a bolt-for-bolt replacement, and the 6000-cycle rating means it is the last battery that locker will need for a long time.
FAQ
A: Sample orders start at 1 set, with small batches of 50 sets and large batches of 500 sets or more. We understand the needs of partners of all sizes.
A: We accept payment for samples, and the sample fee will be refunded upon placement of a bulk order. Sample lead time is 7–10 days
A: Standard dimension and terminals support direct replacement, no complicated wiring changes required.
A: Supports multi-unit parallel connection to upgrade total capacity, matching various RV power needs.
A: Built-in BMS temperature protection ensures stable operation in hot and cold outdoor environments.
A: Compatible with solar panel, vehicle generator and shore power for flexible daily charging.
A: Durable lithium cells with full safety protection cut maintenance issues and replacement costs.
A: We provide a complete set of certified scanned copies and test report summaries, with UN 38.3 test reports and MSDS documents included for each batch.










