Product Parameters
|
Model |
12V 100Ah |
12V 210Ah |
| Rated Voltage |
12.8V |
|
|
Nominal Capacity |
100Ah |
200Ah |
|
Cell Configuration |
4S1P | 4S1P |
| Energy | 1.28kWh | 2.56kWh |
| Size | 395 × 286 × 110 mm | 580 × 242 × 132 mm |
| Protection |
Built-in Smart BMS + Bluetooth App |
|
| Operating Voltage |
10 ~ 14.6V |
|
| Charge-end-off Voltage |
14.6V |
|
| Max. Continuous Charging Current |
100A |
200A |
|
Max. Continuous Discharging Current |
100A |
200A |
|
Peak Discharge Current |
200A(3S) |
400A(3S) |
| Charge Temperature |
0-55℃ |
|
| Discharge Temperature |
-20-60℃ |
|
| Storage Temperature |
Within 2 months:-20℃~40℃,Within 6 months:-10-35℃ |
|
|
Communication Port |
Optional CAN/RS485/Heating Function |
|
| OEM/ODM | Acceptable | |
Features
1. Two thicknesses, one purpose: fitting where a battery box won't go.
The 100Ah is 110 mm front to back; the 200Ah is 132 mm. Both exist for the same reason — the moment in a conversion when the layout only works if the battery disappears under a bench seat, into a side locker, or behind the wheel arch. That single dimension has closed more builds for our customers than any amp-hour figure on a datasheet.
2. One platform, two price tiers.
The 100Ah carries 1,280 Wh for weekend campervans and compact builds; the 200Ah doubles it to 2,560 Wh for full-size motorhomes and long-range 4x4s. Stocking both means one shelf, one set of install drawings and one training session for your technicians — plus an upsell path when a customer comes back wanting more range.
3. 4S1P means fewer things to go wrong.
The 200Ah pack is built as four 200Ah prismatic cells in series. No parallel strings to drift apart, no extra busbars, fewer welded joints — and a cell count low enough that a balance issue shows up in the app before it shows up in a warranty claim. It's the simplest way to build a 2.5 kWh pack, and the easiest to service.
4. Weight your installers will notice.
A 200Ah slim AGM bank lands around 60 kg and needs two people, a trolley and a prayer. This pack is a fraction of that, so a single technician can lift it into a locker and bolt it down. Across a fleet conversion, that difference shows up as days off the schedule. The ABS case also won't rust in marine air or chip like painted steel.
5. Support calls that end in a diagnosis, not a site visit.
Bluetooth is standard on every unit. When a retail customer rings your helpdesk, they open the app together — SOC, voltage, per-cell status, cycle count — and most "dead battery" calls turn out to be the pack sitting in protection mode, resolved in five minutes. For distributors, that's warranty cost you never spend.
6. A swap, not a rewiring job.
Standard 12V nominal, 14.6V max charge — the profile your customers' DC-DC chargers and solar controllers already switch to for lithium. Same terminals, same cabling, charger set to its lithium profile, done. That's why rental operators convert vehicle by vehicle instead of taking whole fleets off the road.
Applications
Campervan conversions — 100Ah under-seat or locker installs where every millimetre of the floor plan counts
Motorhomes & caravan upgrades — 200Ah slim packs replacing twin AGM banks, doubling usable energy in the same footprint
4x4 & overland builds — dual-battery trays and canopies where a 132 mm case fits behind the cab or under the drawer system
Rental fleets — vehicle-by-vehicle AGM-to-lithium conversion with Bluetooth diagnostics for the helpdesk
Marine & solar backup — any 12V deep-cycle application where thickness, weight and cycle life decide the install
FAQ
A: Sample orders start at 1 set, with small batches of 50 sets and large batches of 500 sets or more. We understand the needs of partners of all sizes.
A: We accept payment for samples, and the sample fee will be refunded upon placement of a bulk order. Sample lead time is 7–10 days
A: Standard dimension and terminals support direct replacement, no complicated wiring changes required.
A: Supports multi-unit parallel connection to upgrade total capacity, matching various RV power needs.
A: Built-in BMS temperature protection ensures stable operation in hot and cold outdoor environments.
A: Compatible with solar panel, vehicle generator and shore power for flexible daily charging.
A: Durable lithium cells with full safety protection cut maintenance issues and replacement costs.
A: We provide a complete set of certified scanned copies and test report summaries, with UN 38.3 test reports and MSDS documents included for each batch.










