Product Parameters
|
Model |
12V 100Ah |
12V 160Ah |
12V 200Ah |
12V 230Ah |
12V 280Ah |
12V 314Ah |
| Rated Voltage |
12.8V |
|||||
|
Nominal Capacity |
100Ah |
160Ah |
200Ah |
230Ah |
280Ah |
314Ah |
| Energy | 1.28KWh | 2.048KWh | 2.56KWh | 2.944KWh | 3.584KWh | 4.019KWh |
| Size(mm) | 570*61*278 | 670*69*273 | 730*62*400 | 730*62*400 | 730*82*400 | 730*82*400 |
| BMS Protection Function |
Over charge protection, Over discharge protection, Temperature protection, Balanced function |
|||||
| Charge-end-off Voltage |
14.6V |
|||||
| Max. Continuous Charging Current |
100A |
150A |
200A |
200A |
200A |
200A |
|
Max. Continuous Discharging Current |
100A |
150A |
200A |
200A |
200A |
200A |
|
Peak Discharge Current |
200A(3S) |
300A(3S) |
400A(3S) |
400A(3S) |
400A(3S) |
400A(3S) |
| Charge Temperature |
0-55℃ |
|||||
| Discharge Temperature |
-20-60℃ |
|||||
| Storage Temperature |
Within 2 months:-20℃~40℃,Within 6 months:-10-35℃ |
|||||
|
Optional |
CAN/RS485/Heating Function,Bluetooth (standard) |
|||||
Features
1. A standard 12.8V platform across the entire series, built for RVs, campers and camper trailers. The flat case is what makes the difference: 61 to 82 mm thick, it goes into positions that were never usable before — under the bed slats, under the seat base, into the wheel-arch locker, into the shallow void behind a wall panel.
2. High-quality lithium iron phosphate (LiFePO₄) cells with a long deep-cycle lifespan, stable charge and discharge behaviour and slow capacity degradation in storage. In service it outlasts a lead-acid bank by a wide margin, and it does not need the 50% discharge limit that lead-acid does.
3. Built-in intelligent BMS with multiple safeguards — over-charge, over-discharge, over-current, short circuit and high/low temperature — for safer, more reliable power on the road.
4. Bluetooth monitoring as standard. State of charge, voltage, current and fault codes read straight from a phone, which turns an "is it charging?" phone call into a ten-second answer.
5. Sheet-steel enclosure with integrated mounting flanges. It bolts down directly, no straps or compression bars, and it holds up against vibration, gravel and the occasional hose-down in locker-floor and chassis-rail positions.
6. At the same usable energy, a lead-acid bank weighs two to three times as much. The slim series puts that saved weight back into water, fuel and payload.
7. Multiple charging sources work without reconfiguration: solar panels, the vehicle alternator or on-board generator, and shore power through an AC charger.
Applications
Under-bed and under-seat house battery for Motorhomes and Caravans The 61–82 mm case slides under bed slats and into seat bases, replacing a tall battery box that never quite fitted.
Campervan conversion (VW / Sprinter / Transit class) Mounts flat in sidewall voids and floor-level compartments, leaving living space untouched.
Camper trailer and teardrop off-grid systems 62 mm packs at 200/230Ah give 2.5–2.9kWh in a locker that was designed for little more than a tool kit.
4WD and overland vehicles As a secondary battery for a compressor fridge, lighting and comms, in positions where a conventional box will not go.
Inverter and air-conditioning builds 314Ah at 82 mm carries 4,019Wh with 200A continuous and 500A peak — the configuration for rooftop air conditioning and long off-grid stays.
FAQ
A: Sample orders start at 1 set, with small batches of 50 sets and large batches of 500 sets or more. We understand the needs of partners of all sizes.
A: We accept payment for samples, and the sample fee will be refunded upon placement of a bulk order. Sample lead time is 7–10 days
A: Standard dimension and terminals support direct replacement, no complicated wiring changes required.
A: Supports multi-unit parallel connection to upgrade total capacity, matching various RV power needs.
A: Built-in BMS temperature protection ensures stable operation in hot and cold outdoor environments.
A: Compatible with solar panel, vehicle generator and shore power for flexible daily charging.
A: Durable lithium cells with full safety protection cut maintenance issues and replacement costs.
A: We provide a complete set of certified scanned copies and test report summaries, with UN 38.3 test reports and MSDS documents included for each batch.











